Waveguide external cavity narrow linewidth semiconductor lasers

Narrow linewidth light source is a prerequisite for high-performance coherent optical communication and sensing.Waveguide-based external cavity narrow linewidth semiconductor lasers(WEC-NLSLs)have become a competitive and attractive candidate for many coherent applications due to their small size,volume,low energy consumption,low cost and the ability to integrate with other optical components.In this paper,we present an overview of WEC-NLSLs from their required technologies to the state-of-the-art progress.Moreover,we highlight the common problems occurring to current WEC-NLSLs and show the possible approaches to resolving the issues.Finally,we present the possible development directions for the next phase and hope this review will be beneficial to the advancements of WEC-NLSLs.     

Mechanistic study of the effect of Ca–Sn co-doping on the microwave dielectric properties and magnetic properties of YIG

To investigate the crystal structure, electrical properties, and magnetic properties of Ca–Sn co-doped Y_3-xCa_xFe_5-xSn_xO₁₂ (x = 0.00–0.25 in steps of 0.05), solid-state reaction experiments, first principles calculations, and complex crystal bonding theoretical calculations were performed. The relative permittivity (ε_r) is strongly correlated with the average bond ionicity when Ca²⁺ is added. Furthermore, appropriate Sn⁴⁺ substitution significantly lowers the dielectric loss (tanδ_ε) associated with the lattice energy. The right amount of Ca–Sn co-doping can change the saturation magnetization (4πM_S) and improve the microscopic morphology of YIG, lowering the ferromagnetic resonance linewidth (ΔH) of YIG. The optimized microwave dielectric and magnetic properties are as follows: ε_r = 14.7, tanδ_ε = 4.15 × 10^?4, 4πM_S = 1680 G, and ΔH = 53 Oe for Y_2.8Ca_0.2Fe_4.8Sn_0.2O₁₂ sintered for 6 h at 1425 °C. Based on this material, a simple 3D model of a strip-line circulator with an insertion loss of less than 0.3 dB at each port and isolation greater than 20 dB in the 10–12 GHz range was developed, indicating the potential of the material for microwave high-frequency components such as circulators.     

垂直矩形窄通道启动过程壁温变化特性研究

以去离子水为介质，对竖直矩形窄通道在启动过程中壁面温度的变化规律进行了研究。将一次启动与二次启动时壁面温度的变化特性进行了对比，并改变入口温度，研究了入口温度对启动壁面温度的影响。结果表明：一次启动时壁面温度经过三个阶段，即急剧上升阶段、缓慢升高阶段、缓慢上升至最高壁面温度后又缓慢降至稳态饱和沸腾阶段；二次启动时产生的沸腾滞后现象较一次启动时明显；提高入口温度可增加饱和沸腾段，减少壁面温度的波动，在一定程度上可避免壁面温度过冲对换热器的损坏。     

自然循环窄矩形通道内过冷沸腾两相摩擦阻力特性

采用去离子水作为实验工质，在低压低流速自然循环工况下开展了单面加热可视化窄矩形通道内的过冷沸腾摩擦阻力特性实验研究。实验中测量了实验段内的压降数据，并通过高速摄影仪拍摄了窄矩形通道内的气液两相图像，提出了过冷沸腾条件下的两相摩擦压降的剥离计算方法。基于本实验中获得摩擦压降数据，对分别基于均相流模型和分液相模型的经典两相摩擦压降计算关系式进行了评估，实验结果表明：采用不同等效黏度计算方法的均相流模型计算结果比实验值明显偏小；而分相流模型中，Sun and Mishiba关系式和Tran关系式均能够较好地预测摩擦阻力，计算值与实验值的平均相对偏差在±15%以内。结合实验数据，以分相流模型方法为基础，考虑全液相Reynolds数、Martinelli参数和Laplace数的影响，获得了计算分液相折算系数的经验关系式，与实验数据符合较好, 平均相对误差在10%范围内。     

Fourier transform ion cyclotron resonance mass spectrometry at the true cyclotron frequency

Ion cyclotron resonance (ICR) cells provide stability and coherence of ion oscillations in crossed electric and magnetic fields over extended periods of time. Using the Fourier transform enables precise measurements of ion oscillation frequencies. These precisely measured frequencies are converted into highly accurate mass-to-charge ratios of the analyte ions by calibration procedures. In terms of resolution and mass accuracy, Fourier transform ICR mass spectrometry (FT-ICR MS) offers the highest performance of any MS technology. This is reflected in its wide range of applications. However, in the most challenging MS application, for example, imaging, enhancements in the mass accuracy of fluctuating ion fluxes are required to continue advancing the field. One approach is to shift the ion signal power into the peak corresponding to the true cyclotron frequency instead of the reduced cyclotron frequency peak. The benefits of measuring the true cyclotron frequency include increased tolerance to electric fields within the ICR cell, which enhances frequency measurement precision. As a result, many attempts to implement this mode of FT-ICR MS operation have occurred. Examples of true cyclotron frequency measurements include detection of magnetron inter-harmonics of the reduced cyclotron frequency (i.e., the sidebands), trapping field-free (i.e., screened) ICR cells, and hyperbolic ICR cells with quadrupolar ion detection. More recently, ICR cells with spatially distributed ion clouds have demonstrated attractive performance characteristics for true cyclotron frequency ion detection. Here, we review the corresponding developments in FT-ICR MS over the past 40 years.     

Impacts of spectral variations in multiwavelength excitation method on measurements of fluorescently whitened papers

The multiwavelength excitation (MWE) method for measuring the colorimetric properties of fluorescent whitening agent (FWA)‐treated specimens illuminated by a standard daylight illuminant computationally approximates not the spectral power distribution (SPD) of the illuminant but the luminescent SPD excited thereby by a weighted sum of the luminescent SPDs excited by a few different narrow‐band illuminations. The weights are optimized for the actual SPDs of those illuminations and the bispectral luminescent radiance factors of typical FWA‐treated paper specimens. Since the latter is invariant among instruments once provided as the common numerical data, the variations of the narrow‐band SPDs give major impacts to the reproducibility of this method. The weights optimized for the varied SPDs, however, mitigate the impacts. For investigating how they impact, one basic illumination system and its 16 simple variation systems were built virtually. The basic system consists of three narrow‐band LEDs and one blue‐excited white LED, whereas the individual simple variation system has either the peak wavelength or spectral width of one of the four LEDs (including the blue LED in the white LED) varied. With those systems, seven FWA‐treated papers with the known bispectral radiance factors were measured computationally by simulating the procedure of the MWE method. The differences in the colorimetric values measured with the simple variation systems from those with the basic system are far below the just noticeable difference, which indicates that the MWE method can be a practical solution for better reproducibility in measuring FWA‐treated papers.     

狭窄基坑条件下基于普朗德尔地基极限承载力公式的隆起稳定性研究

在市政行业的基坑支护工程中,支护桩+内支撑支护是广泛使用的支护形式。传统的基坑隆起稳定性分析方法是采用普朗德尔地基极限承载力计算公式分析,但是该地基极限承载力计算公式不适用于狭窄基坑。本文从提出狭窄基坑的定义出发,根据普朗德尔地基极限承载力计算公式的基本原理,重新假定了狭窄基坑条件下的破坏模式及相关参数,并推导了相应的地基极限承载力计算公式。算例显示,该公式能较好的反映狭窄基坑的实际条件,安全系数有适当提高。     

大跨度钢结构桁架施工技术

介绍了大跨度钢结构桁架施工技术;在山区狭窄场地内,采用临时支架及空中换钩进行吊装施工,论述了实际施工过程的复杂性和技术难度。     

弹性理论变分泛函的代入构成法与狭义泛函

以小位移弹性理论为例,从数学上给出了由场方程出发寻找相应的变分泛函的一般方法——代入构成法。应用此法得到了一对狭义泛函。通过狭义泛函证明了本构关系是各种变分泛函的欧拉方程。